FS: 2004 Norco Fluid 3.0 15.5" - $450 obo
SOLD - Thanks all
Hi all, I need to sell my wife's old bike so I can create some space in the garage for a new project. It's a 2004 Norco Fluid 3.0 - size 15.5". I'm asking $450 OBO for the entire bike as listed below.
The frame is built pretty burly. They licensed the Horst Link from Specialized so it's like a FSR. Frame travel is adjustable between 4.5" and 5.1". Weight wise - it's not a lightweight racer (but it's probably good for taking some hits), I would guestimate around 30-31 lbs. It's lighter than my Evo for sure.
I'd like to disclose that the fork does have a problem with the rebound knob. It doesn't like to turn freely, so the fork most likely needs an overhaul. I have a Manitou Black 90-120mm fork that works fine that I can throw in for $50.
FRAME: Square to Round tube 1.8 mm thinner wall, VPS linkage design , adjustable 4.5-5.1" travel , Fox Vanilla R 6.75x1.75"
FORK: Marzocchi MXR
HEADSET: Ritchey LB threadless
CRANKS: Truvativ 5D triple ISIS
BOTTOM BRK: Truvativ ISIS SL giga splined
PEDALS: Shimano Platform Clipless
CHAIN: Sram PC-59
FREEWHEEL: Sram PG-950 9 sp cassette
FRONT CHANGER: Shimano Deore
REAR CHANGER: Shimano Deore
SHIFTERS: Shimano Deore
BAR: Kore riser bar
STEM: Kalloy XC
FRONT BRAKE: Avid Mechanical 160mm
REAR BRAKE: Avid Mechanical 160mm
BRAKE LEVERS: Avid
WHEELS: Specialized Hubs/Mavic Rims
TIRES: 26 x 2.4 WTB Mutano Raptor
SADDLE: Performance Forte Team
SEATPOST: Alloy post
SIZE: S (15.5")
SOLD - Thanks all
Hi all, I need to sell my wife's old bike so I can create some space in the garage for a new project. It's a 2004 Norco Fluid 3.0 - size 15.5". I'm asking $450 OBO for the entire bike as listed below.
The frame is built pretty burly. They licensed the Horst Link from Specialized so it's like a FSR. Frame travel is adjustable between 4.5" and 5.1". Weight wise - it's not a lightweight racer (but it's probably good for taking some hits), I would guestimate around 30-31 lbs. It's lighter than my Evo for sure.
I'd like to disclose that the fork does have a problem with the rebound knob. It doesn't like to turn freely, so the fork most likely needs an overhaul. I have a Manitou Black 90-120mm fork that works fine that I can throw in for $50.
FRAME: Square to Round tube 1.8 mm thinner wall, VPS linkage design , adjustable 4.5-5.1" travel , Fox Vanilla R 6.75x1.75"
FORK: Marzocchi MXR
HEADSET: Ritchey LB threadless
CRANKS: Truvativ 5D triple ISIS
BOTTOM BRK: Truvativ ISIS SL giga splined
PEDALS: Shimano Platform Clipless
CHAIN: Sram PC-59
FREEWHEEL: Sram PG-950 9 sp cassette
FRONT CHANGER: Shimano Deore
REAR CHANGER: Shimano Deore
SHIFTERS: Shimano Deore
BAR: Kore riser bar
STEM: Kalloy XC
FRONT BRAKE: Avid Mechanical 160mm
REAR BRAKE: Avid Mechanical 160mm
BRAKE LEVERS: Avid
WHEELS: Specialized Hubs/Mavic Rims
TIRES: 26 x 2.4 WTB Mutano Raptor
SADDLE: Performance Forte Team
SEATPOST: Alloy post
SIZE: S (15.5")