FyrFytrRyn
RTB to a WNL
so hey, i fixed this beauty up and shes like butter. but the SOB has too much travel for what i want to use it for. so im looking to trade it for a freeride/AM bike. dont get me wrong its fun, but i need something that actually feels a bit more like a mountain bike, less like a dirtbike with no engine. throw me offers. also, sincve i know your all my friends and dont really want to eff me over, if you think i can get a better deal by selling off another site and buying a bike id like to know, also, how much is this thing worth, honestly.
Picture: vvvv
AD:
2004 cortina DHE8 Blue/Black
9” travel rear via Avalanche racing shock. 8” front travel via Marz-888R forks. Mavic DH wheel set, Hadley rear hub, unknown 20mm front with new bearings. Hayes 8” hydraulic disk brake on rear, avid juicy 7 on front. Profile CroMo cranks w/ platform peddles. DH bars, Race Face seatpost. Intense DH tires . chris king HS, XT components. Single chain ring in front, 9 speed in back.the guy i bought it from started with the frame and custom built the entire bike for racing. approx 39 Lbs. also, when i bought the bike, the swing arm had a minor crack, i had it professionally media blasted, repaired with more gussets, heat-treated back to 6061 t-6 specs, then re powder coated. while the rear was apart, i replaced ALL of the bearings and alum. axles for the rear link, aswell as heavily gusseted the seat mast. bike is super smooth, also, i added x-stiff springs and 10 wt oil to 185 mm for a heavier rider, ill give you the stock springs aswell if ya want.
http://socaltrailriders.org/forum/attachment.php?attachmentid=1747&d=1161478138
Picture: vvvv
AD:
2004 cortina DHE8 Blue/Black
9” travel rear via Avalanche racing shock. 8” front travel via Marz-888R forks. Mavic DH wheel set, Hadley rear hub, unknown 20mm front with new bearings. Hayes 8” hydraulic disk brake on rear, avid juicy 7 on front. Profile CroMo cranks w/ platform peddles. DH bars, Race Face seatpost. Intense DH tires . chris king HS, XT components. Single chain ring in front, 9 speed in back.the guy i bought it from started with the frame and custom built the entire bike for racing. approx 39 Lbs. also, when i bought the bike, the swing arm had a minor crack, i had it professionally media blasted, repaired with more gussets, heat-treated back to 6061 t-6 specs, then re powder coated. while the rear was apart, i replaced ALL of the bearings and alum. axles for the rear link, aswell as heavily gusseted the seat mast. bike is super smooth, also, i added x-stiff springs and 10 wt oil to 185 mm for a heavier rider, ill give you the stock springs aswell if ya want.
http://socaltrailriders.org/forum/attachment.php?attachmentid=1747&d=1161478138
