STR | SocalTrailRiders.org

gecallo · 01-30-2007, 01:52 PM

so I had a friend install an mrp (sys.2) chainguide on my intense, and the chain lines up with the bottom roller perfectly, but is misaligned with the top one...unfortunately my friend is out of country riding somewhere in Europe (lucky bastard!)...so I turn to you guys...any advice?

uzziboy · 01-30-2007, 02:50 PM

You can turn the roller that is not aligned around, there should be a difference in the two sides. One is thinner and one side is fatter. I had to do the same thing with mine

gecallo · 01-30-2007, 04:17 PM

Quote:

Originally Posted by uzziboy

You can turn the roller that is not aligned around, there should be a difference in the two sides. One is thinner and one side is fatter. I had to do the same thing with mine

I'll give that a shot...muchos gracias

uzziboy · 01-30-2007, 11:53 PM

no prob!! let me know if it worked or not

01-30-2007, 01:52 PM	#1 (permalink)
gecallo Member	mrp sys.2 help so I had a friend install an mrp (sys.2) chainguide on my intense, and the chain lines up with the bottom roller perfectly, but is misaligned with the top one...unfortunately my friend is out of country riding somewhere in Europe (lucky bastard!)...so I turn to you guys...any advice? __________________ [SIZE="2"]"...ca$h money ain't nev-uh gonna play out..." --New Jack Hustler[/SIZE]

01-30-2007, 02:50 PM	#2 (permalink)
uzziboy Suck on these	You can turn the roller that is not aligned around, there should be a difference in the two sides. One is thinner and one side is fatter. I had to do the same thing with mine

01-30-2007, 11:53 PM	#4 (permalink)
uzziboy Suck on these	no prob!! let me know if it worked or not

STR | SocalTrailRiders.org

Your Southern CaliforniaMountain Biking Community

Your Southern California
Mountain Biking Community