STR | SocalTrailRiders.org

Team Smitty · 02-26-2008, 01:49 PM

Hello all,

Our company Swift Engineering, Inc. is hiring to support the production of our new open wheel formula racecars and I have an opening for an experienced advanced composite technician, I know many of you are gearheads and tinker with bikes and other hobbies in your spare time and are mechanically inclined. If qualified and interested or know someone who is, please pass it along…..And no riding a carbon bike doesn’t constitute experience.

Sorry.

Below is a rough draft of an ad that I will post on Monster next week, it shows a need for all experience levels, and that will be true in the near future, but at this time the immediate need is for an experienced tech.

Composite technicians:

Racecar manufacturer located in San Clemente, Ca. is seeking composite technicians.
Candidates will have the rare opportunity to work on every composite aspect of a “state of the art” open wheel racecar.
All experience levels are needed, but all must have strong a mechanical aptitude.
Daily tasks may include preparing master molds for the tooling department, lamination of wings, chassis, or bodywork, to finishing and bonding of various composite parts.

Competitive wages and benefits.

Steve Smith,
Manufacturing Engineer / Composite Shop Manager
ssmith@swiftengineering.com
www.swiftengineering.com

Swift Engineering, Inc.
1141-a Via Callejon, San Clemente Ca 92673
TEL 949 492-6608
Fax 949 366-3497 attention; S Smith

Thanks,
Smitty

Pugz · 02-26-2008, 01:56 PM

Let me know when you need some more general experienced people as I think I might be qualified and am currently looking. Good luck in your search.

faded1004 · 02-26-2008, 02:02 PM

ooo, i like swift springs... they work great on my car...

Dino Brown · 02-26-2008, 06:14 PM

BUMP!

Keep up the good work "SMITTY"

skate · 02-26-2008, 06:31 PM

Sounds like you actually have to work at this place.

I'll just keep my job for now, but good luck with the search.

On a side note, it would be pretty cool to drive one of those cars.

bighit8 · 02-26-2008, 07:07 PM

Ya for the general stuff let me know, looking foe extra work. I have been a Mechanic for 15 years.

02-26-2008, 01:49 PM	#1 (permalink)
Team Smitty Senior Member	Job opening Hello all, Our company Swift Engineering, Inc. is hiring to support the production of our new open wheel formula racecars and I have an opening for an experienced advanced composite technician, I know many of you are gearheads and tinker with bikes and other hobbies in your spare time and are mechanically inclined. If qualified and interested or know someone who is, please pass it along…..And no riding a carbon bike doesn’t constitute experience.Sorry. Below is a rough draft of an ad that I will post on Monster next week, it shows a need for all experience levels, and that will be true in the near future, but at this time the immediate need is for an experienced tech. *Composite technicians:* Racecar manufacturer located in San Clemente, Ca. is seeking composite technicians. Candidates will have the rare opportunity to work on every composite aspect of a “state of the art” open wheel racecar. All experience levels are needed, but all must have strong a mechanical aptitude. Daily tasks may include preparing master molds for the tooling department, lamination of wings, chassis, or bodywork, to finishing and bonding of various composite parts. Competitive wages and benefits. Steve Smith, Manufacturing Engineer / Composite Shop Manager ssmith@swiftengineering.com www.swiftengineering.com Swift Engineering, Inc. 1141-a Via Callejon, San Clemente Ca 92673 TEL 949 492-6608 Fax 949 366-3497 attention; S Smith Thanks, Smitty

02-26-2008, 06:14 PM	#4 (permalink)
Dino Brown Sir Smack-Alot	BUMP! Keep up the good work "SMITTY" __________________ L.A. KINGS ... dw-link.com/reasons SheDevil- I was on George's crotch for hours Integradriv3r- How many kids do you have that you DON'T know about Pugz- For an Asian man he is pretty big

02-26-2008, 07:07 PM	#6 (permalink)
bighit8 STR Veteran	Ya for the general stuff let me know, looking foe extra work. I have been a Mechanic for 15 years. __________________ Roger: You guys should join us next Sunday. It would be nice to have another screamer CHEWYETI: Heat, Beat, Repeat!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cleveland Natl. Forest Open - Luge / Old Camp	MTBMaven	Trailhead	52	10-30-2008 08:49 PM
Part-time Opening at CHUMBA: Admin Assistant	alank	The Pub	5	01-18-2008 04:43 PM
Anyone want to see some Magic? (Kona Magic Link)	Pho'dUp	General Discussion	11	07-11-2007 10:00 PM
Big Bear opening day???	Clockwork_Rider	Trail Talk	9	06-10-2007 08:38 PM
Baldy opening for DH?	noirb74	General Discussion	4	05-28-2005 02:28 AM

02-26-2008, 01:56 PM	#2 (permalink)
Pugz Fat guy in a little coat	Let me know when you need some more general experienced people as I think I might be qualified and am currently looking. Good luck in your search.

02-26-2008, 02:02 PM	#3 (permalink)
faded1004 STR Veteran	ooo, i like swift springs... they work great on my car...

02-26-2008, 06:31 PM	#5 (permalink)
skate Senior Member	Sounds like you actually have to work at this place. I'll just keep my job for now, but good luck with the search. On a side note, it would be pretty cool to drive one of those cars.

STR | SocalTrailRiders.org

Your Southern CaliforniaMountain Biking Community

Your Southern California
Mountain Biking Community