FS: Hope/Sapim/Flow 26" Disc Wheelset

[dubjay]

I'm selling one of my 26" disc wheelsets. This is a great lightweight setup for AM use.

I've had them since September of last year and have about 500 miles on them. I just had them trued and retensioned. There are a few scratches and nicks on the rims from normal trail use.

Here are the specs:

Hubs:
F: Hope Pro II Gun Smoke Blue 32h w/ QR adapter
R: Hope Pro II Gun Smoke Blue 32h w/ 10mm thru-bolt adapter

Note: I have a set of Hope 20mm adapters somewhere which I can swap out on the front hub if need be.

Spokes:
Sapim CX-Ray laced 3x w/ DT Swiss alloy nipples

Rims:
Stan's Flow set up tubeless with Stan's yellow tape.

If tubeless isn't your thing, just remove the tubeless valve and run tubes as you normally do.

Weight:
F: 810g
R: 910g

Price:
$525

To build an identical wheelset, it'll cost you close to $700.

I can deliver to Fullerton Loop on Thursdays or pickup is available in Irvine.

Let me know if you have any questions.

-WJ

[duke777]

WOW now that's pimp! Does that include the thru-axle?

[dubjay]

Originally Posted by duke777

WOW now that's pimp! Does that include the thru-axle?

I can include a rear Hadley 10mm thru-bolt for $25.



Or just pick up a DT Swiss RWS somewhere...or use a Saint axle. Anything that's compatible with a 10mm thru-bolt hub will work.

[dubjay]

Bumping before these go to the unkempt masses on Craigslist, MTBR and eBay.

[swooshschwartz]

What do you mean by AM ride? sorry new and not down with the verbage

[dubjay]

Originally Posted by swooshschwartz

What do you mean by AM ride? sorry new and not down with the verbage

Sorry. AM meaning All Mountain ride -or- trail bike?

Although these wheels are light enough to be used to race cross country, they are strong enough to take a licking.

[tkblazer]

no more little wheels huh

[dubjay]

Originally Posted by tkblazer

no more little wheels huh

Bingo!

[DISCO]

What is the width on the rims?

[dubjay]

Originally Posted by DISCO

What is the width on the rims?

They are the Stan's Flow rims so 28mm on the outside, and 22.6mm on the inside.