STR | SocalTrailRiders.org

TooManyTacos · 02-21-2008, 10:15 PM

I've got a set of BB7s, actually BBDB's, which are the old name, in used condition. They work fine, but probably need new pads (the original pads are included--they have a lotta wear though). One of the calipers is missing that rubber sleeve thing that the cable goes through. Also included is a good set of 160 mm Avid rotors and the bolts. Mounting hardware is included for both calipers too--the front will work with either IS or post mount. $40 takes it all. I think I also have a good set of FR5 levers that I can add for another $5.

SOLD!

faded1004 · 02-21-2008, 10:30 PM

i was plannign on ordering the 200+mm kit? do you know what i might need to get this and run it with the 200+mm rotor?

TooManyTacos · 02-21-2008, 10:41 PM

You would need the two 203mm rotors, plus the adapters for front and back. According to Pricepoint, rotors are about $70 for the pair, and the adapters are around $20 for the pair. Not to discourage you from buying my stuff, but if you want the big rotors, it sounds like it'd be cheaper for you if you bought a whole brand new set of BB7s for about $125 from Pricepoint.

faded1004 · 02-21-2008, 10:44 PM

: ) man, well... let me ask... not liek i need the 203mm, why are you selling?

Pato · 02-22-2008, 05:05 AM

Quote:

Originally Posted by faded1004

i was plannign on ordering the 200+mm kit?

Jason,

What bike are you putting this on? At your size and weight, unless you are doing major DH riding, it is WAY overkill to run 8" rotors. You will be carrying unnecessary weight and increasing the likelyhood of bent rotors. If you feel the need to run bigger rotors I'd upgrade the front to 7"/180mm and leave the rear at 6"160mm.

Duc

Pho'dUp · 02-22-2008, 05:16 AM

dibs if they're still available!

carbonman · 02-22-2008, 06:46 AM

pm sent

reflux · 02-22-2008, 08:26 AM

If someone only purchases one, I'll take the other.

TooManyTacos · 02-22-2008, 10:28 AM

Sold to Mr. faded pending payment! If it falls through, I'll get in touch with the next person. Thanks everyone for the interest and STR for being such a cool community!

faded1004 · 02-22-2008, 09:47 PM

my first official part for my new first bike! it was good to meet you...

02-22-2008, 05:16 AM	#6 (permalink)
Pho'dUp Ghetto Swan Lake	dibs if they're still available! __________________ http://www.eppendorf.com/int/hawkpop...FQOjFQodTS20kA TKBlazer: judging from Carl in the picture, he prefers the rear entrance

02-21-2008, 10:30 PM	#2 (permalink)
faded1004 STR Veteran	i was plannign on ordering the 200+mm kit? do you know what i might need to get this and run it with the 200+mm rotor?

02-21-2008, 10:41 PM	#3 (permalink)
TooManyTacos Or Not Enough	You would need the two 203mm rotors, plus the adapters for front and back. According to Pricepoint, rotors are about $70 for the pair, and the adapters are around $20 for the pair. Not to discourage you from buying my stuff, but if you want the big rotors, it sounds like it'd be cheaper for you if you bought a whole brand new set of BB7s for about $125 from Pricepoint.

02-21-2008, 10:44 PM	#4 (permalink)
faded1004 STR Veteran	: ) man, well... let me ask... not liek i need the 203mm, why are you selling?

02-22-2008, 06:46 AM	#7 (permalink)
carbonman Captian of BIG RED	pm sent

02-22-2008, 08:26 AM	#8 (permalink)
reflux STR Veteran	If someone only purchases one, I'll take the other.

02-22-2008, 10:28 AM	#9 (permalink)
TooManyTacos Or Not Enough	Sold to Mr. faded pending payment! If it falls through, I'll get in touch with the next person. Thanks everyone for the interest and STR for being such a cool community!

02-22-2008, 09:47 PM	#10 (permalink)
faded1004 STR Veteran	my first official part for my new first bike! it was good to meet you...

STR | SocalTrailRiders.org

Your Southern CaliforniaMountain Biking Community

Your Southern California
Mountain Biking Community