Frame, Float36RC2, Crankset, XTR, WHeels, etc

[Rob]

Nashbar 21" Blue MTB Frame, Steel

Here's the nashbar link. http://www.nashbar.com/profile.cfm?category=6000130&subcategory=60001176& brand=&sku=14736&storetype=&estoreid=&pagename=Sho p%20by%20Subcat%3A%20Frames%2FBikes

New, never completely built, except for the Truvativ Stylo GXP crankset, XTR F/R Der's

45.00 NOW 35.00 for the frame, includes older Control Tech Alloy Seatpost.

75.00 SOLD for the New Truvative GXP Crankset. SOLD

30.00 now 25 for New XTR Der. FD-M952 Bottom Pull, Top Swing, 28.6


20.00 Now 15 bucks!!! Used but working like new Deore 9 spd shifter set. Scratches where the shifter touches the ground when bike is turned upside down.

75.00 SOLD Pend. sale for used but recently trued wheelset. Shimano FH-M475 6 bolt Disc hubs, 32 hole, silver. Alex TD20 black rims, Silver spokes. Came off a stock Marin B17. SOLD

50.00 Thomson 50MM stem, 31.8, 0deg rise. Coming off my Titus, will trade for 70MM thomson stem or 60-70mm Hope or other? stem Perfect condition, all bolts greased since new. Still Available, buyer had to backout.

40.00 Now 35 ! for Thomson 30.9mm x 410mm layback Elite seatpost in black. Has lightning bolt scratches from when installed into a new frame that needed the seatube reamed Probably wont show in most frames when set at proper height.

325.00 NOW 300! SOLD 2007 Fox Float 36RC2 Steering tube cut at 7 1/4" Has some scratches on the right leg and top crown. Also two very small scratches on the top part of the left stanchion. Works great. Probably has about 200-300 miles on it. SOLD

300.00 for used but perfect cond. Fox DHX 5.0 Air. 8.5x2.5" Came on my new Titus El Guapo. Or trade for coil spring shock(Marz/Fox/Cane Creek+cash)

Pics to come...

[scruffylooking]

Dibs on the 50mm Thomson stem. Rob, I'll PM when I get home. On my mobile.

[scruffylooking]

Some killer deals here. Like that fork! I wish I had a frame for it. Someone build a bike around that puppy!

[Rob]

Originally Posted by scruffylooking

Some killer deals here. Like that fork! I wish I had a frame for it. Someone build a bike around that puppy!

Thanks, I paid just a little bit more than my asking price for it, just passing on the good deal I got. Wish I could keep it.

[foofighter]

this isnt the frame that you're building your SS with is it?

[Rob]

Was going to build this up for a trekking bike but just decided to use the El Guapo for bike packing. I was also going to try it out as a single speed. I'll probably just get something else for that.

[foofighter]

ah gotcha. you'll have something for the feb ride right?

[Rob]

The Titus, but it's got gears...

[foofighter]

we're duct tape your shifter

[PacMan]

I'd seriously consider that Float if the steerer was long enough. Damn damn damn.

[kbteachme]

Hey Rob,

I want the Thomson 30.9mm layback Elite seatpost in black. I think it will fit my Uzzi. I may have to cut it down to 250mm to make it work. If it fits, will you take $35 cash? I live in San Juan Cap. near Marco Middle School. I work in M.V. near La Paz. Shoot me an email.

[Rob]

Originally Posted by kbteachme

Hey Rob,

I want the Thomson 30.9mm layback Elite seatpost in black. I think it will fit my Uzzi. I may have to cut it down to 250mm to make it work. If it fits, will you take $35 cash? I live in San Juan Cap. near Marco Middle School. I work in M.V. near La Paz. Shoot me an email.

I paid 80 for it and I barely used it...I'll take 40

[2wheel_lee]

Originally Posted by kbteachme

I want the Thomson 30.9mm layback Elite seatpost in black. I think it will fit my Uzzi.

BTW, if you're your Uzzi is an Intense Uzzi SLX or Uzzi VPX, the seat post size is 31.6.

[tkblazer]

rob, what model cranks are you selling?

[kbteachme]

Rob, what are your hours at Revo in Dana Point? I live very close to your shop and I think you guys built a bike for me some years back (an older Ellsworth ID). I just need to see if it will fit my Intense Uzzi frame. Do you also have any Hope or Salsa seatpost QR collars for sale?

[Rob]

Originally Posted by tkblazer

rob, what model cranks are you selling?

Truvative Stylo GXP. Triple chainrings, 175mm length. Outboard bearings.

Originally Posted by kbteachme

Rob, what are your hours at Revo in Dana Point? I live very close to your shop and I think you guys built a bike for me some years back (an older Ellsworth ID). I just need to see if it will fit my Intense Uzzi frame. Do you also have any Hope or Salsa seatpost QR collars for sale?

PM sent.

[.8down]

Nam if you are not gonna take those Cranks I'm interested.

[kbteachme]

Hey Rob,
I have an UZZI SLX and it looks like I need a 31.6. It looks close to a 30.9 to me, but I guess I'm wrong. Darn!!!! P.S. Thanks tkblazer for the specs.

[tkblazer]

Originally Posted by .8down

Nam if you are not gonna take those Cranks I'm interested.

go for it thai, i think i'm just gonna get some new XT's

[.8down]

Originally Posted by tkblazer

go for it thai, i think i'm just gonna get some new XT's

if youre sure, Im in, but let me know if you change your mind meng..always deals somewhere..